F.W. Bell Ma-2000 DC/ True RMS AC Non-contact Millameter

Description

• FW Bell Ma-2000 DC / TRUE RMS AC NON-CONTACT MILLIAMETER

  The mA-2000 is a battery-powered, clamp-on instrument that measures dc and ac current as low as 1 mA and as high as 2000 mA, at frequencies up to 100 kHz. The mA-2000 consists of a palm-sized meter and a detachable probe. The probe clamps around the conductor to be measured. There is no need to disconnect the conductor or make physical contact with the circuit being measured. The current-carrying conductor is surrounded by a magnetic field that is proportional to the amount of current that is flowing through it. The probe senses the magnetic field and provides a signal to the meter. The meter then translates this signal into a milliamp current value. The probe features a unique aperture mechanism that retracts easily and closes smoothly. The probe can accommodate conductors up to 5.3 mm (0.21 in.) in diameter. The meter operates on two standard 9 volt alkaline batteries or can be operated with an ac adapter. Two ranges can be selected (199.9 mA or 1999 mA full scale) in addition to three modes of measurement; dc, low-frequency ac or high-frequency ac. The meter contains a 3 ½ digit display that provides dc and true rms ac readings. In addition, an analog output provides a 1 mV / mA voltage signal proportional to the current being measured. This output can be connected to a voltmeter, oscilloscope or recorder.

  Sale includes the following items:

     · Ma-2000
  · Batteries
  · Probe
  · Manual
  · Travel Case
  

WARRANTY AND DISCLAIMER

• This item is covered by our TOTAL CONFIDENCE WARRANTY.
• Refer to complete details under warranty section.